The final walkthrough is the visit you make shortly before closing to confirm the house is in the condition you agreed to buy. It takes most people twenty minutes. It should take you an hour, and this page is mostly about why.
The single most important thing to understand is what the walkthrough is not. It is not a second inspection period, and it is not a renegotiation right. By the time you are standing there, your inspection contingency has expired.
What the contract actually says
Purchase contracts differ by state, but the structure is remarkably consistent, and one widely used state form puts the critical sentence in capital letters: closing constitutes acceptance of the property in its then-existing condition unless provision is otherwise made in writing.
Read that twice, because it is the whole ballgame. Anything you notice and do not put in writing before you close, you have accepted. The keys change hands and the problem becomes yours.
Three other provisions do the real work:
- An express right of access. The seller has to give you reasonable access through the earlier of closing or your taking possession, specifically including a final walkthrough. So the visit is your right, not a courtesy — but it is an access right, not a contingency.
- A condition standard. The transferable version, in one form or another, is that the property must be in substantially the same or better condition at closing as on the date of the offer, reasonable wear and tear excepted. If it is not, the buyer may terminate by written notice. That standard, not your preferences, is what you are measuring against.
- A clean-out obligation. The seller must remove all personal property that is not part of the sale, plus all garbage and debris, by the date possession passes to you.
And if the seller is in material breach, the remedies are usually two: terminate and recover your deposit together with reasonable costs, or decline to terminate and sue for specific performance — that is, force the sale through on the agreed terms. Neither of those is a quick fix on closing day, which is exactly why timing matters.
California works slightly differently, with a final verification of condition within about five days of closing which is expressly not a contingency; its stated purpose is to confirm the property was maintained as agreed and that agreed repairs were completed. Check your own state’s form rather than assuming — and note that any defect you could see and accepted when you made the offer sits outside the walkthrough entirely.
When to do it
There is a real sweet spot, and it is narrower than people think. Too early and the seller has not finished moving out — which matters because move-out is when most new damage happens. Too late and you have no time to act on what you find, and given the remedies above, time is the only leverage you have.
Aim for late enough that the house is substantially empty, early enough that delaying the closing is still administratively possible. In practice that usually means the day before closing, or the morning of if the seller moves out late. If you can only get in an hour before signing, say so to your agent in advance and ask them to build in slack, because an hour is not enough time to fix anything.
The checklist, organised by what actually goes wrong
1. Repairs promised in the inspection addendum
- Check each line item against the addendum text, not against your memory of the conversation.
- Ask for receipts, invoices and permits. “It’s done” is not evidence; a licensed contractor’s invoice is.
- Check it was done to the standard specified. An addendum saying “repair by licensed plumber” is not satisfied by the seller’s own patch.
- Re-test anything testable. Run the repaired fixture, cycle the repaired appliance, check the repaired outlet with a tester.
2. Things that were supposed to convey
- Appliances, by serial number where the contract or the listing identified them. Swapping a conveyed appliance for a cheaper one is a recurring problem, not an urban legend.
- Light fixtures, chandeliers, ceiling fans, mirrors, built-in shelving.
- Window treatments, blinds, curtain rods and brackets.
- Garage door openers and their remotes, all keys, gate fobs, mailbox keys, alarm codes.
- Outside: sheds, playsets, wall-mounted televisions and their brackets, and any landscaping the contract named.
- Water softeners, filtration, propane tanks — owned or leased? — and smart thermostats, cameras and doorbells. For anything smart, the modern version of this problem is whether the seller has de-registered it from their account. A thermostat still paired to the previous owner is not yours in any practical sense.
3. Things removed that should have stayed
The classic dispute. The test is whether the item was affixed, and whether it was present when you made the offer. Look for fixtures unscrewed and taken, shrubs and trees dug out, planted bulbs lifted, cabinet hardware swapped, custom switch plates replaced with builder-grade ones.
4. Utilities on and working
- Confirm electricity, gas and water are on. A walkthrough with the utilities off is not a walkthrough, and a seller who has already transferred service has effectively defeated it. Raise this the moment you discover it.
- Run the heating and the air conditioning through a full cycle, both modes, regardless of season. Run the furnace in July. This is the single most expensive thing you can discover in twenty minutes.
- Water heater: hot water at several fixtures, not just the nearest one.
- Every sink, tub, shower and toilet — and run a few at once to test drainage and pressure together.
- Every outlet and switch, with an outlet tester. They cost about ten dollars.
- Well pump, septic and sump pump. Fill the sump pit if you can reach it and watch the pump run.
5. Damage from the move-out
Statistically the biggest category, and the reason to go late. Walls, corners, door frames and stair nosings take gouges from furniture. Floors show scratches and tears that were under rugs. Doors come off plumb, screens tear, banisters loosen. Look for fresh oil staining in the garage and on the driveway. In a condominium, check the lift and the stairwell too, and ask whether the association will charge any damage to your unit.
6. Debris left behind
Check the basement, attic, crawl space, garage and shed — the places sellers leave things. The real harm is not untidiness, it is disposal cost: paint cans, chemicals, tyres, mattresses and full bins are all items you will now pay someone to haul away. Price it before you decide whether to raise it.
7. What was hidden at the inspection — the section most checklists skip
This is the highest-value part of the walkthrough and almost nobody uses it properly. At the inspection, the house was full of the seller’s belongings. Now it is empty, and you are seeing parts of it for the first time.
- Walk the furniture footprints. The rug that covered the floor stain. The wardrobe against the wall that hid the mould. The headboard over the water damage. Go room by room looking specifically at the clean rectangles where furniture stood.
- Inspect the walls that had boxes against them. Stored goods along a basement wall are a standard obstruction noted on inspection reports. Those walls are now visible — look at them as if for the first time, for termite shelter tubes, salt staining and water marks.
- If the house was tenant-occupied at inspection, the same applies with more force, and you have a second and separate question: has the tenant actually left? Confirm possession as a distinct issue from condition.
- Closets, panelled walls and ceiling tiles are the other commonly listed obstructions. Open and look.
Method that makes all of this usable: photograph everything, with timestamps, and compare against the inspection report photos and the original listing photos. The listing photos are the best available record of what was in the house when you made your offer, which is precisely the baseline the condition standard refers to.
Something is wrong. What now?
The remedies, roughly in the order they actually happen:
- The seller fixes it before closing. Cleanest, no lender involvement, needs time.
- Delay the closing. Needs both parties to agree, plus a check on your rate lock and possibly an extension fee, and it collides with movers and leases.
- A repair credit or closing-cost credit from the seller. Practical and common — but capped by the interested-party contribution limits for your loan type and down payment. Ask your loan officer for the figure before you negotiate a number, because a credit above the limit simply cannot be applied.
- An escrow holdback. The remedy everybody suggests and almost nobody can actually use. See below.
- A price reduction. Requires re-underwriting against the appraisal and can raise appraisal questions of its own.
- Refusing to close. Real, but it is the nuclear option, and it runs through the contract remedies rather than through goodwill.
The escrow holdback reality
Here is the part nobody explains. An escrow holdback means closing on time with money withheld to cover the unfinished work. It sounds ideal. In practice it is hard to get, and the reason is structural.
The mortgage investors’ rules for postponed improvements were built for new construction, not for existing-home repair disputes. Postponement is contemplated for items that are part of the sales contract, delayed for a valid reason such as weather or a materials shortage, and that do not prevent an occupancy permit. And for existing construction, anything affecting safety, soundness or structural integrity must be completed before the loan is sold — which rules out exactly the problems that most often surface at a walkthrough.
Then the lender adds its own, much tighter, overlay, and this is what actually governs. To give you a sense of the real parameters from current lender documentation:
- One wholesale lender caps the repair at $5,000, withholds 1.5 times the estimate, and sets a deadline of 14 calendar days from disbursement with no exceptions for weather or anything else. It permits holdbacks on conventional, FHA and VA loans, and not at all on jumbo or USDA loans. Eligibility is limited to minor repairs that do not affect safety or habitability — and a pricing adjustment applies, meaning the holdback costs you rate.
- Another lender withholds 150% of the value of the incomplete work with a 60-day deadline, extendable to 120 days over winter, and limits eligibility largely to exterior items — landscaping, grading, driveways, painting, gutters, decks — with interior work only case by case and pre-approved before closing.
So before you propose a holdback, ask your loan officer three questions: is it allowed on my loan type at all, what is the dollar cap, and what is the deadline. If the answer is $5,000 and fourteen days, a seller credit or a delayed closing is almost certainly the better route.
New construction is a different problem
On a new build, the walkthrough is usually called an orientation or pre-closing inspection, and it generates a punch list rather than a dispute. That changes the dynamics in your favour and against you at once. In your favour: the builder has an established process and a warranty, typically covering workmanship for a period after closing, and punch items are expected rather than resented. Against you: builders routinely close with punch items outstanding, and once you have signed, you are relying on the warranty process rather than on your leverage as a buyer.
So get every item in writing, signed by someone with authority, with dates. Photograph them. And distinguish between cosmetic items you are content to chase under warranty and anything structural, mechanical or safety-related, which you should resolve before closing on exactly the same logic as above — those are the items a holdback cannot cover.
Who should come
You, obviously, and your agent, who knows what the addendum said and can send the written notice that the contract requires. Bring whoever will actually live there, because a second pair of eyes catches different things. Bring the inspection report, the repair addendum, the listing photos on your phone, an outlet tester and a torch.
If a repair was significant — a roof, a panel, a sewer line — it is worth paying your original inspector for a short re-inspection visit rather than relying on your own judgement. It costs a little and it converts your opinion into a professional’s written finding, which is a materially stronger position if you end up negotiating.
Frequently asked questions
What is a final walkthrough?
A visit shortly before closing to confirm the property is in the condition you agreed to buy, that promised repairs were done, and that items meant to convey are still there. It is a confirmation of condition, not a second inspection period.
When does the final walkthrough happen?
Usually within a few days of closing, and in some states the contract sets a window such as five days before. The best timing is late enough that the seller has substantially moved out but early enough that delaying the closing is still possible.
Can I back out after the final walkthrough?
Only on the contract’s terms. Most contracts require the property to be in substantially the same or better condition as on the date of the offer, with reasonable wear and tear excepted, and allow termination by written notice if it is not. Your inspection contingency has already expired, so dissatisfaction alone is not a basis.
What if repairs were not completed?
Raise it in writing before closing, because closing generally constitutes acceptance of the property as it then stands. The usual remedies are the seller completing the work, a delayed closing, a seller credit within your loan’s contribution limits, or an escrow holdback if your lender permits one.
Can I get an escrow holdback for unfinished repairs?
Sometimes, and far less often than people assume. Investor rules treat postponed work as a new-construction matter, and safety or structural items on an existing home generally must be finished before the loan is sold. Lender overlays are tighter still — caps around $5,000, deadlines as short as 14 days, and no availability at all on some loan types.
What should I bring to the final walkthrough?
The inspection report, the repair addendum, receipts or invoices for the repairs, the original listing photos, an outlet tester and a torch. Photograph everything with timestamps so you have a dated record.
Does the seller have to clean the house?
The seller must remove all personal property that is not part of the sale and all garbage and debris. “Broom clean” is the usual standard; a professional clean is not implied unless your contract says so.
Related reading
- The home inspection — The contingency that has expired by walkthrough day.
- Making an offer — Where the condition standard and the deadlines are set.
- Closing costs — Including the credits a seller can and cannot give you.
- The home buying process — Where the walkthrough sits in the timeline.
- Escrow explained — How holdbacks and escrow accounts actually work.
- After buying your first house — What to do in the first week once the keys are yours.